California licenses contractors through one state agency, the Contractors State License Board (CSLB). The rule is broad: if someone is paid to build, alter, repair or tear down part of your property, they almost always need a CSLB license. This page explains who counts as a contractor, the small-job exemption that changed in 2025, and what happens when you hire someone without a license.
Who counts as a contractor
The definition in B&P Code §7026 covers anyone who undertakes, offers, bids on, or does, personally or through others, the work to "construct, alter, repair, add to, subtract from, improve, move, wreck or demolish" a building or other structure or improvement. It includes subcontractors and specialty contractors.
Two points matter for you as a homeowner:
- Offering counts. A person who bids on or offers to do the work is acting as a contractor. They don't have to start the job to need a license.
- "Through others" counts. A person who arranges the work and hands it to crews still needs a license.
Advertising is regulated too. It's a misdemeanor to advertise construction work without a license in the classification advertised (B&P Code §7027.1), and licensed contractors must put their license number on contracts, bids and ads (B&P Code §7030.5).
The $1,000 minor-work exemption
Since January 1, 2025, the licensing law doesn't apply to a project where the aggregate price for labor, materials and all other items is less than $1,000, the work is "casual, minor, or inconsequential," and the work does not require a building permit (B&P Code §7048). The amount was raised from $500 by Assembly Bill 2622 (Stats. 2024, ch. 240), as shown in the section's history note in the CSLB 2026 License Law and Reference Book.
The exemption is narrower than the dollar figure suggests. Under §7048 it does not apply when:
| Situation | Result |
|---|---|
| The job needs a building permit | License required, whatever the price |
| The work is part of a larger operation | License required |
| A larger job is split into contracts under $1,000 | License required |
| The person advertises or uses a sign, card or other device suggesting they're a contractor | License required |
| The person employs someone to do or help with the work | License required |
So a handyman with a helper, or one whose truck says "General Contractor," needs a license even for a $300 repair. The CSLB states the same line from its side: it's illegal for an unlicensed person to perform contracting work on a project of $1,000 or more, including labor and materials (CSLB: How the Complaint Process Works).
Other exemptions you may run into
Owners working on their own property
B&P Code §7044 exempts an owner who builds or improves a structure on their own property if none of the improvements are intended or offered for sale and the owner does all the work personally or through employees paid wages only. An owner can also contract directly with licensed trade contractors for each part of the work. Selling or offering the structure for sale within one year after completion creates a rebuttable presumption that it was built for sale.
If you take the owner-builder route, you are the one coordinating the trades and answering to the building department. Read the permit guide before you pull permits yourself.
Murals
Since January 1, 2026, an artist who paints or restores a mural under an agreement with someone who can authorize the work is exempt. Painted wall signs aren't murals for this purpose (B&P Code §7050; CSLB new laws bulletin, December 2025).
Licensed in the right classification
A license alone isn't enough. It has to cover the work. California sorts licenses into general engineering (A), general building (B), residential remodeling (B-2) and specialty (C) classifications (B&P Code §7055). A roofer needs C-39, an electrician's company C-10, and so on. See license classifications explained.
To qualify, an applicant needs at least four years of experience as a journeyman, foreman, supervising employee or contractor in the classification within the last 10 years (16 CCR §825, printed in the CSLB Law Book). Every active license also needs a $25,000 contractor's bond on file (bond and workers' comp rules).
What happens if you hire an unlicensed contractor
For the contractor
Contracting without a license is a misdemeanor. A first conviction carries a fine of up to $5,000, up to six months in county jail, or both. Repeat convictions carry larger mandatory fines tied to 20 percent of the contract price (B&P Code §7028). After a declared natural disaster, unlicensed repair work is punishable as a felony (disaster rules).
For you
- They can't sue you for payment. An unlicensed contractor may not bring an action to collect compensation for work that required a license (B&P Code §7031(a)).
- You can sue to get your money back. A person who used an unlicensed contractor may sue to recover all compensation paid (§7031(b)).
- Security interests fail. A security interest taken to secure payment for unlicensed work is unenforceable (§7031(c)).
- Restitution as a crime victim. If the contractor is convicted under §7028, you are treated as a crime victim eligible for restitution, whether or not you knew they were unlicensed (§7028(h)).
The protections that come with a license are what you give up. The contract notice California requires on home improvement contracts warns that if you use an unlicensed contractor, the CSLB may not be able to help resolve your complaint, your only remedy may be civil court, and you may be liable for injuries to the contractor or the contractor's employees (B&P Code §7159(e)(5)). There is no license bond to claim against either.
How to check a license
Search by license number, business name or personnel name at the CSLB License Check, or call the CSLB at 800-321-2752. The same page checks Home Improvement Salesperson registrations. California license numbers are all digits, up to eight. Confirm that:
- The license is active and the name matches the business on your contract
- The classification covers your job
- A bond is on file, and workers' compensation is on file if the contractor has employees
Then use the hiring checklist for the rest of the vetting.
Related pages
- California contractor licensing guide
- License classifications: A, B, B-2 and C
- Filing a complaint with the CSLB
- Licensing and permits topics
Sources
- California Business and Professions Code §§7026, 7027.1, 7028, 7030.5, 7031, 7044, 7048, 7050, 7055, 7159
- CSLB, California Contractors License Law & Reference Book, 2026 Edition (PDF): statute text, history notes and 16 CCR §825
- CSLB: How the Complaint Process Works
- CSLB Industry Bulletin #25-04, New Laws Affecting Contractors Starting in 2026 (PDF)
- CSLB License Check
Frequently Asked Questions
How much work can someone do in California without a contractor license?
Less than $1,000 in total for labor, materials and everything else on one project, and only if the work needs no building permit (B&P Code §7048). The exemption doesn't apply if the person advertises as a contractor, uses employees, or splits a bigger job into small contracts to stay under the limit.
When did California's unlicensed work limit go from $500 to $1,000?
January 1, 2025. Assembly Bill 2622 (Chapter 240, Statutes of 2024) amended B&P Code §7048, and the same bill added the condition that the work must not require a building permit.
Can I get my money back from an unlicensed contractor in California?
B&P Code §7031(b) lets a person who used an unlicensed contractor sue to recover all compensation paid for work that required a license. An unlicensed contractor also can't sue you to collect payment for that work (§7031(a)).
Do I need a license to work on my own house in California?
Not if you do the work yourself, or with your own wage-paid employees, and the improvements aren't intended or offered for sale (B&P Code §7044). If you sell, other conditions apply, and selling within a year of completion creates a presumption that you built it to sell.